Stanzteile für Automotive

Stamped parts, bent parts, drawn parts and high-gloss parts for automotive

Stamped parts, bent parts, drawn parts and high-gloss parts for automotive

Are you looking for an established supplier for the automotive industry? With a maximum of know-how and our high-performance machinery we are able to meet the high demands of this dynamic and demanding industry. For our customers in the automotive sector we produce stampings, bent parts, drawn parts and high-gloss parts in various materials and in large and small series. This flexibility, combined with the renowned KochS quality are our trademark.

Stamped, bent and drawn parts for automotive – speed and reliability

Important factors for economic success in the automotive sector are short production times and absolute adherence to delivery dates. Otherwise, waiting times that are not taken into account can lead to costly consequences. With our modern and efficient machinery, we have both conventional and CNC machines at our disposal to manufacture your products quickly and on schedule – even with large order volumes. In addition, we are characterised by a high degree of flexibility and are therefore able to process even short-term inquiries promptly.

Ziehteil auf weißem Hintergrund

Exterior Trim BMW F44 – C-pillar orifice

MaterialEN-AW 1070; t= 1,2mm
SurfaceAnodized or HGB
Tool typeTransfer tool
TechnologyDecorative forming tools A-Class
Press environment300 tons hydraulics

Zierteile auf weißem Hintergrund

Interior trim ashtray

MaterialStainless steel; t= 0,8 mm
SurfaceChrome
Tool typeFollow-on composite tool
TechnologyDecorative forming tools A- Class
Press environment200 tons excenter press

Zierteil vor weißem HIntergrund

Entry bar

MaterialAluminium; t= 0,8 mm
SurfaceLacquered
Tool typeManual insertion transfer
TechnologyDecorative forming tools A- Class
Press environment100 tons hydraulics

verschiedene Teile zur Schliesstechnik

Locking components for side, front and tailgate locks

MaterialS355 – S500 sheet steel; t= 1,5- 4,0 mm
SurfaceNo information
Tool typeFollow-on composite tools
TechnologyPrecision punching dies with thread
Press environment200- 630 tons excenter press

Teil für Schließtechnik auf weißem Hintergrund

Split back seat support

MaterialS420 sheet steel; t= 4,0 mm
SurfaceNo information
Tool typeFollow-on composite tool
TechnologyPunching tool for solid forming partly
Press environment1250 tons servo press

verschiedene Teile für die Schließtechnik auf weißem Hintergrund

Holder, vehicle body and safety components

MaterialS355 – S500 Sheet steel; t= 1,5- 4,0 mm
SurfaceNo information
Tool typeFollow-on composite tools
TechnologyForming tools with thread or similar joining techniques
Press environment200- 800 tons excenter / servo press

Strukturteil vor weißem Hintergrund

Body side panel

MaterialAluminium; t= 2,0 mm
SurfaceNo information
Tool typeFollow-on composite tool
TechnologyForm drawing with blank holder
Press environment250 tons excenter press

Strukturteile

Roof liner reinforcing plate

MaterialSteel sheet; t= 0,8 mm
SurfaceNo information
Tool typeTransfer tool
TechnologyDeep-Drawing of forms 1200 mm with sheet holder
Press environment800 tons transfer press

Strukturteil für Automotive vor weißem Hintergrund

Reinforcing plate middle tunnel

MaterialSteel sheet; t= 1,5 mm
SurfaceNo information
Tool typeFollow-on composite tool
TechnologyReady falling in the subsequent composite train
Press environment400 tons excenter press

goldene Tiefziehteile vor weißem Hintergrund

Electrical Engineering – Test Probes Automotive and Electrical Engineering

MaterialBrass; t=0,6 – 1,5mm
SurfaceNone
Tool typeProgressive tool
TechnologyPrecision deep drawing
Press environment250 tons excenter press

Tiefziehteil Edelstahl

Drive Technology – Cardan Shaft Automotive

MaterialSteel; t= 0,8 mm
SurfaceZinc
Tool typeFollow-on composite tool
TechnologyPrecision deep drawing
Press environment250 tons excenter press

Produktbeispiel Tiefziehteile auf weißem Hintergrund

Drive, chassis, airbag, seats and lighting technology

Materialdivers , t=0,1 – 3,0mm
SurfaceNo information
Tool typeFollow-on composite tool and transfer tool
TechnologyDeep Drawing
Press environment50- 500 tons excenter press

Stamped, bent and drawn parts for automotive – competence in all areas

Our expertise in various materials and production processes is the cornerstone for meeting the various requirements for stampings, bent parts, drawn parts and high-gloss parts for automotive applications. Our experienced experts work together with the customer to develop an individual product that is precisely tailored to the desired requirements. For example, we select the appropriate material in close consultation with the customer and focus on crucial issues such as the later use. For example, aluminum is ideally suited for decorative elements for noble interiors. Functional workpieces, on the other hand, are often easier to realize with other metals. In this context, our knowledge of the industry enables us to select the most effective solution together with our customers

Stamped, bent and drawn parts for automotive – quality and price

In order to survive in a highly competitive market, quality and price must be right for stampings, bent and drawn parts in the automotive sector. Due to our powerful CNC machines, our experienced employees manufacture precise products. Due to our high quality standards we have been certified according to ISO 9001:2015. Due to many automated processes, our modern production methods also enable us to offer you this high quality at an excellent price-performance ratio.